Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
Malfunction Indicator Lamp: Symptom Related Diagnostic Procedures
Chart A-1 Malfunction Indicator Lamp Circuit Check
CHART A-1 MALFUNCTION INDICATOR LAMP CIRCUIT CHECK - LAMP DOES NOT COME "ON" AT IGNITION SWITCH ON
(BUT ENGINE AT STOP)
CIRCUIT DIAGRAM
CIRCUIT DESCRIPTION
When the ignition switch is turned ON, ECM causes the main relay to turn ON (close the contact point). Then, ECM being supplied with the main
power, turns ON the malfunction indicator lamp (MIL). When the engine starts to run and no malfunction is detected in the system, MIL goes OFF
but if a malfunction was or is detected, MIL remains ON even when the engine is running.
