Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
ABS Main Relay: Diagnostic Trouble Code Tests and Associated Procedures
Description
The Antilock Brake System (ABS) control module monitors the voltage at each terminal ("A1", "A14" and "A15") of the solenoid circuit constantly
with the ignition switch turned ON. Also, immediately after the ignition switch is turned "ON", perform an initial check as follows.
Switch the fail-safe relay in the order of ON-OFF-ON and check if the voltage at 3 solenoid circuit terminals changes to High-Low-High. If anything
faulty is found in the initial check and when the voltage at all solenoid circuit terminals is low with the ignition switch turned ON and ABS not
operated, this DTC will be set.
(Part 1 Of 2)
