suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 508 > < Diagram Information and Instructions|Page 506
Page 2
background image

Tightening Torque

(a): 2.5 N.m (0.25 kg-m, 1.8 lb-ft) 

6) Check to make sure that when throttle is fully open TP sensor voltage is as shown below.

TP sensor voltage when throttle is fully open : 

4.0 ± 0.5 V 

7) Install ECM.
8) With ignition switch OFF, disconnect battery negative cable from battery for one minute or more.
9) Connect negative cable to battery.

Diagram Information and Instructions|Page 508 > < Diagram Information and Instructions|Page 506