suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Power Steering Pump|Removal and Installation|Page 3761 > < Power Steering Pump|Removal and Installation
Page 2
background image

2. Connect discharge hose and suction hose to P/S pump.

Tightening Torque (b): 60 Nm (43.5 ft. lbs.) 

3. Connect P/S pump pressure switch lead wire to switch terminal.
4. Install generator belt.
5. Install air cleaner outlet hose.
6. Fill oil tank with specified P/S fluid.

Power steering fluid: DEXRON III (A/T fluid) or equivalent.

7. Purge air in P/S circuit.
8. Connect negative cable at battery.
9. Start engine and check P/S system for fluid leakage.

Power Steering Pump|Removal and Installation|Page 3761 > < Power Steering Pump|Removal and Installation