Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
Rear Knuckle: Service and Repair
REMOVAL
1. Hoist vehicle and remove wheel.
2. Remove wheel hub. Refer to Transmission and Drivetrain.
3. Support lower arm with jack.
4. Remove tie rod end.
Special Tool (A): 09913-65210 or equivalent.
5. Remove ball stud nut.
6. Remove strut bracket bolts from strut bracket.
7. By tapping knuckle on its end with hammer or using bearing puller, disconnect knuckle from ball stud.
8. While lowering jack, remove knuckle/wheel spindle comp.
