Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
9. Remove knuckle oil seal, dust cover and wheel spindle.
INSTALLATION
Reverse removal sequence to install knuckle, wheel spindle and oil seal.
NOTE:
^
When installing wheel spindle to knuckle, coat their mating surfaces with sealant.
"A": Sealant 99000-31110 or equivalent.
^
Also, fill recess in wheel spindle with about 10 g lithium grease.
"B": Grease 99000-25010 or equivalent.
1. Tighten wheel spindle nut to specified torque.
Tightening Torque (a): 50 Nm (36.5 ft. lbs.)
2. Press-fitting knuckle oil seal Drive in knuckle oil seal until its end contacts stepped surface of knuckle using special tools.
Special Tool:
(B): 09944-66010
