Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
Suspension Strut / Shock Absorber: Testing and Inspection
Rear Shock Absorber Inspection
INSPECTION
1. Inspect for deformation or damage.
2. Inspect bushings for wear or damage.
3. Inspect for evidence of oil leakage.
Replace any defective part.
WARNING: When handling rear shock absorber in which high-pressure gas is sealed, make sure to observe the following precautions.
^
Don't disassemble it.
^
Don't put it into the fire.
^
Don't store it where it gets hot.
^
Before disposing it, be sure to drill a hole in it where shown by an arrow in the figure and let gas and oil out. Lay it down sideways for
this work.