Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
3. Put manual select lever in L position, then set cable to cable bracket with E-ring.
4. While putting cable end through manual select lever, shift manual select lever back to "N" position and fix it there by tightening both adjust nut
and lock nut. In doing this, be careful not to apply excessive force to cable.
NOTE:
^
Note that N position is the third from the lowest L without counting it.
^
When manual select lever is pushed up to N position, there should be a little clearance between lever and adjust nut. However, after confirming
N position of lever, cable adjustment must be made so that this clearance becomes zero before tightening lock nut.
Tightening Torque
(a): 7 Nm (0.7 kg-m, 5 ft. lbs.)
5. Confirm function of all selective ranges including automatic transmission brake interlock system.
6. Install console box as it was.
