Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
Front Door Window Glass: Service and Repair
4 Door
Front Door Glass Removal and Installation
Removal
1) Remove inside handle bezel.
2) Remove door mirror bezel (if equipped).
3) Remove door armrest or door inside pull handle case.
4) Remove window regulator handle (if equipped). To remove regulator handle, pull off snap ring by using a cloth as shown in the figure.
5) Remove door trim with inside weatherstrip. With inside handle bezel tilted as shown in the figure, turn door trim 90— counterclockwise to remove
it. And disconnect power window switch lead wire at coupler (if equipped).
6) Remove door sealing cover. Fit inside handle bezel back into specified place of door panel.
7) Remove door outside weatherstrip. Lower window all the way down. Then, use a tape-wrapped putty knife (or screwdriver) to pry off weatherstrip.
CAUTION: Use a tape-wrapped putty knife (or screwdriver) to pry off weatherstrip. Use of an unwrapped tool will cause damage to
painting.