Swift L4-1298cc 1.3L SOHC MFI (1997)
5. Disconnect brake pipes from ABS actuator with special tool (A): 09950-78210.
NOTE: Do not allow brake fluid to get on painted surface, motor and electrical couplers.
6. Remove ABS actuator assembly from vehicle.
7. Disconnect motor pack harness coupler.
INSTALLATION
Install ABS actuator assembly in reverse order of REMOVAL procedure, noting the following points.
^
Torque all fasteners to specification for (a): 8 - 12 Nm (6.0 - 8.5 ft. lbs.) and (b): 14 - 18 Nm (10.5 - 13.0 ft. lbs.).
^
After installing, bleed air from brake system.