Swift L4-1298cc 1.3L SOHC MFI (1997)
8. Remove brake back plate.
Installation
1. Apply water tight sealant ("A": Sealant 99000-31090) to mating surfaces of brake back plate and rear knuckle.
2. Install brake back plate and tighten back plate bolts to specified torque of (a): 18 - 28 Nm (13.5 - 20.0 ft. lbs.).
3. Install parking brake cable to brake plate.
4. Install wheel cylinder, and tighten wheel cylinder bolts and brake pipe flare nut to specified torque.
5. Install brake shoes.
6. Install wheel hub, washer and new spindle nut.