Swift L4-1298cc 1.3L SOHC MFI (1997)
10. Align 4 timing marks as shown in figure to facilitate its installation.
11. Loosen tensioner bolt and stud, and remove belt from crankshaft timing belt pulley and camshaft timing belt pulley after pushing up the tensioner
plate fully by finger as shown figure.
CAUTION:
-
Never bend timing belt.
-
After timing belt is removed, never turn camshaft and crankshaft independently more than such an extent as shown below. If turned,
interference may occur among piston and valves, and parts related to piston and valves may be damaged.
12. Remove tensioner, tensioner plate, tensioner spring and spring damper.