Swift L4-1298cc 1.3L SOHC MFI (1997)
6) Adjust clearance,between armature plate and magnet clutch by putting shim on compressor shaft.
Standard clearance "c" = 0.35-0.65mm (0.014-0.025 in.)
7) Tighten new armature plate nut as specified below.
Tightening Torque
(a):15-20 N-m (1.5-2.0 kg-m,10.8-15.2 lb-ft)
Special Tool
(A):09820-55810
8) Place lead wire under lead wire clamp,and tighten lead wire camp screw.
Tightening Torque
(b):2-2.5 N-m (0.25 kg-m,1.4-1.8 lb-ft)