Swift L4-1298cc 1.3L SOHC MFI (1997)
3. Using special tool (G), press it slowly by hand until mechanical seal contacts the stopper of clutch installation boss.
Special Tool
(G): 09990-48230
NOTE: With mechanical seal pressed in completely, its upper face must come to a the position lower than cirdip fitting groove. Check this
condition visually.
CAUTION: Do not use a press machine, hammer, etc. to push on special tool (G).
2) Install circlip.
NOTE: Position circlip with round edge facing down as shown.
Special Tool
(E): 09900-06108
3) Install new key in shaft groove.