suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Windows and Glass > < Combination Switch|Service and Repair|Page 3792
Page 3
background image

5. Connect contact coil and combination switch connectors other than yellow connector and tighten its wire harness with bands and clamp.

6. Install knee protector, steering column lower cover and then hole cover.
7. Install steering wheel to its shaft. Refer to Steering and Suspension.
8. Connect battery negative cable.
9. Enable air bag system. Refer to Air Bags and Seat Belts.

Windows and Glass > < Combination Switch|Service and Repair|Page 3792