Swift L4-1298cc 1.3L SOHC MFI (1997)
EFE Heater: Service and Repair
Removal
-
Remove throttle body. In this case, however, it is not necessary to disconnect fuel hoses and engine cooling water hoses from throttle body.
-
Disconnect EFE heater coupler.
-
Remove EFE heater from intake manifold.
Installation
-
Clean mating surfaces of throttle body and intake manifold that mate with EFE heater.
-
Install EFE heater to intake manifold. Use new upper gasket.
-
Install throttle body according to procedure described previously.
-
Connect EFE heater coupler.