Swift L4-1298cc 1.3L SOHC MFI (1997)
Steering Gear: Service and Repair
Manual Steering
On-Vehicle Service
LUBRICATION
When inner parts of the steering gear case were disassembled, they should be washed clean before reassembly. It is recommended to use the grease
as given at the right where grease application is indicated in the text.
SUZUKI SUPER GREASE (E) 99000-25050, or Lithium grease (applicable for -40° C ~ 130° C or 104° F ~ 266° F).
Rack and Pinion (Steering Gear Case)
REMOVAL
CAUTION: Be sure to set front wheels in straight direction and remove ignition key from key cylinder before these steps, otherwise contact coil of
airbag system may get damaged.
1. Slide driver's seat as far back as possible.
2. Pull off front part of floor mat on driver's side and remove steering shaft joint cover.