suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Manual Steering|Page 3009 > < Steering Wheel|Specifications
Page 1
background image

Steering Wheel: Testing and Inspection
Manual Steering

1. Check steering wheel for play and rattle, holding car in straight forward condition on the ground.

Steering wheel play "a": 0 - 30 mm (0 - 1.2 inch)

2. If steering wheel play is not within specification, inspect as follows and replace if found defective.

a. Tie-rod end ball stud for wear (ball stud should move when more than 2 kg-cm torque is applied.)
b. Lower ball joint for wear.
c. Steering shaft joint for wear.
d. Steering pinion or rack gear for wear or breakage.
e. Each part for looseness.

Manual Steering|Page 3009 > < Steering Wheel|Specifications