Swift L4-1298cc 1.3L SOHC MFI (1997)
2. Connect tie rod end to knuckle. Tighten castle nut until holes for split pin are aligned, but only within specified torque.
Tightening Torque (a): 35 - 55 Nm (25.5 - 39.5 ft. lbs.)
3. Bend new split pin as shown.
4. Inspect for proper toe.
5. After confirming proper toe, tighten tie rod end lock nut to specified torque.
Tightening Torque (b): 35 - 55 Nm (25.5 - 39.5 ft. lbs.)
6. Tighten wheel to specified torque and lower hoist.
Tightening Torque for wheel nuts: (a): 50 - 80 Nm (36.5 - 57.5 ft. lbs.)
