Swift L4-1298cc 1.3L SOHC MFI (1997)
Special Tool (A): 09925-98221 or equivalent.
6. Install 3rd gear needle bearing, apply oil to it, then install 3rd gear and synchronizer ring.
7. Drive in high speed sleeve & hub assembly by using special tool and hammer.
Special Tool (B): 09913-84510 or equivalent.
NOTE:
^
While press-fitting sleeve & hub, make sure that synchronizer ring key slots are aligned with keys in sleeve & hub assembly.
^
Check free rotation of 3rd gear after press-fitting sleeve & hub assembly.
^
Needle bearings and synchronizer rings for 3rd and 4th are identical respectively.
8. Install circlip, needle bearing, apply oil to bearing, then install synchronizer ring and 4th gear.
CAUTION: Confirm that circlip is installed in groove securely.
