Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Heater Control Valve Cable: Service and Repair
Heater Control Cables
REMOVAL
1. Remove ashtray and center garnish mounting screw.
2. Remove center garnish.
3. Remove cluster panel lower cover.
4. Remove control lever knobs and control panel garnish.
5. Remove control panel.
6. Disconnect lead wire from blower motor switch at coupler.
7. Disconnect control cables from blower motor unit and heater unit.
8. Remove control lever ass'y.
9. Disconnect control cables from control lever.
INSTALLATION
