Swift GA L4-1298cc 1.3L SOHC MFI (2001)
8. Install crankshaft pulley. Fit hole of pulley to pin on crankshaft timing belt pulley, and tighten pulley bolts to specified torque.
Tightening Torque
(a): 16 Nm (1.6 kg-m, 11.5 ft. lbs.)
9. Clamp harness securely.
10. Install water pump pulley and drive belt.
Tightening Torque
(a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
11. Tighten two bolts of engine right mounting bracket.
Tightening Torque
(a): 55 Nm (5.5 kg-m, 40.0 ft. lbs.)
12. Install air cleaner case with air cleaner outlet pipe.
13. Remove lifting device.
14. Adjust drive belt tension.
15. Adjust power steering pump belt tension or A/C compressor belt tension, if equipped.
16. Connect negative cable at battery.