Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Backing Plate: Service and Repair
Vehicles Without A Wheel Hub
REMOVAL
1. Perform steps 1) to 5) off brake drum REMOVAL.
2. Perform steps 2) and 3) of brake shoe REMOVAL.
3. Perform steps 2) and 3) of wheel cylinder REMOVAL.
4. Remove cable from brake back plate by squeezing parking brake cable stopper ring.
5. Remove brake back plate.
INSTALLATION
1. Apply water tight sealant to mating surfaces of brake back plate and rear knuckle,
"A": Sealant 99000-31090
2. Install brake back plate and tighten back plate bolts to specified torque.
Tightening Torque (a): 23 Nm (2.3 kg.m, 17.0 ft. lbs.)