Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Lifter / Lash Adjuster: Service and Repair
VALVE LASH (CLEARANCE)
1. Remove negative cable at battery.
2. Remove cylinder head cover.
3. Remove engine under cover of right side from body.
4. Using special tool and wrench, turn crankshaft pulley clockwise until "V" mark (in white paint) on pulley aligns with "0" (zero) calibrated on
timing belt cover.
Special Tool
(A): 09919-16020
5. See if the rocker arms of No.1 cylinder are off the respective cam lobes (of camshaft); if so, valves (1, 2, 5 and 7) in left figure are ready for
clearance checking and adjustment. Check valve lashes at valves (1, 2, 5 and 7). If the rocker arms of No.4 cylinder are off the respective cam
lobes, check valve lashes at valves (3, 4, 6 and 8).
NOTE: When checking valve clearance, insert thickness gauge between camshaft and cam-riding face of rocker arm.
