Swift GL L4-1298cc 1.3L SOHC MFI (2000)
3. Install exhaust manifold cover(s).
4. Connect oxygen sensor coupler and clamp its wire securely.
5. Tighten exhaust (No.1. pipe to manifold nuts and exhaust manifold stiffener bolt.
Tightening Torque
(a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.) (Exhaust manifold with Warm Up TWC)
(b): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
(c): 43 Nm (4.3 kg-m, 31.5 ft. lbs.) (Exhaust manifold without Warm Up TWC)
6. Connect negative cable at battery.
7. Check exhaust system for exhaust gas leakage.