Swift GL L4-1298cc 1.3L SOHC MFI (2000)
1. Install magnet clutch coil.
Protrusion on under side of coil ring must match hole in compressor assembly to prevent movement and correctly locate lead wire.
2. Using special tool (C), install snap ring as shown.
Special Tool
(C): 09990 - 06107
3. Install magnet clutch.
1. Set magnet clutch squarely over clutch installation boss.
2. Place special tool (E) onto clutch bearing.
Ensure that edge rests only on inner race of bearing.
3. Install snap ring.
Special Tool
(E): 09951 - 15510
CAUTION: Be careful not to scratch bearing seal.
