Swift GL L4-1298cc 1.3L SOHC MFI (2000)
terminal" of monitor connector.
If duty and/or idle speed is out of specifications, inspect idle air control system referring to Diagnostic Flow Table B-4 IDLE AIR CONTROL
SYSTEM CHECK.
NOTE:
-
Above duty values are ON duty meter indications.
-
Duty values with (*) are applicable to vehicle used at high altitude (higher than 2,000 m or 6,560 ft).
4. Remove service wire from monitor connector.
5. Check that specified engine idle speed is obtained with A/C ON if vehicle is equipped with A/C.
If not, check A/C ON signal circuit and idle air control system.