suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

ABOUT US
Sensing and Diagnostic Module <--> [Air Bag Control Module]|Removal and Installation|Page 89 > < Sensing and Diagnostic Module <--> [Air Bag Control Module]|Removal and Installation|Page 87

Swift GL L4-1298cc 1.3L SOHC MFI (2000)

Page 4
background image

3. Install SDM to SDM bracket.

Tightening Torque:
(b): 5.5 Nm (0.55 kg.m, 4.0 lb.ft)

4. Connect SDM connector to SDM and install CPA to connector securely.
5. Install center console.
6. Connect negative cable to battery.
7. Enable air bag system. Refer to "Air Bag(s) Arming and Disarming".

Sensing and Diagnostic Module <--> [Air Bag Control Module]|Removal and Installation|Page 89 > < Sensing and Diagnostic Module <--> [Air Bag Control Module]|Removal and Installation|Page 87