Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Malfunction Lamp / Indicator: Testing and Inspection
Air Bag Wiring Lamp Diagnostic
1. Turn "ON" ignition switch and wait till "AIR BAG" warning lamp has flashed 7 times.
2. By using service wire, connect diag. switch terminal of "AIR BAG" monitor coupler and body ground (or ground terminal of "AIR BAG" monitor
coupler).
3. To read diagnostic trouble code, watch "AIR BAG" warning lamp. (For frequency of code signal, refer to DIAGNOSTIC TROUBLE CODE
TABLE of AIR BAG DIAGNOSTIC SYSTEM CHECK).
If diagnostic trouble code is not indicated, check diagnosis switch circuit according to CHART F of AIR BAG DIAGNOSTIC SYSTEM CHECK.
NOTE:
-
When there are 2 or more diagnostic trouble codes, all applicable code will be indicated from smaller number to large number in order.
-
On-board diagnosis function is not possible to read history diagnostic trouble code and clear diagnostic trouble code.
