Swift GL L4-1298cc 1.3L SOHC MFI (2000)
3. Align location spring end with guide groove and tighten spring screw securely.
4. Apply grease to guide grooves and detent pin.
5. Fix key release cam inserting special tool into holes on cam and solenoid bracket if cam is not fixed. Refer to step 4 of "Interlock Cable
Installation" for details.
6. Connect interlock cable end to cam referring to step 5 and 6 of "interlock Cable Installation".
7. Remove special tool or lock pin from key release cam.
8. Check to confirm that key release cam and interlock cable operate properly referring to step 7 and 8 of "Interlock Cable Installation".
9. Connect connector of shift solenoid and illumination lamp.
10. Install select indicator and center console.
11. Connect negative cable to battery.
12. Check to confirm that brake (key) interlock system operates properly.
