Swift GL L4-1298cc 1.3L SOHC MFI (2000)
-
Sudden closing of door before adhesive is completely set may cause glass to become loose or to come off. Therefore, if door is opened or
closed before adhesive is completely set, make sure to open all door glasses and use proper care.
-
If molding is not securely in place, hold it down with a tape until adhesive is completely set.
-
Each adhesive has its own setting time. Be sure to refer to maker's instruction, check setting time of adhesive to be used and observe
precautions to be taken before adhesive is set.
-
Refrain from driving till adhesive is completely set so as to ensure proper and sufficient adhesion.
16. Stick rear view mirror bracket (1) as shown in the figure.
Distance for rear view mirror installing position
"a": Approx. 13 mm (0.52 in.)
"b": Approx. 7 mm (0.28 in.)
17. Install rear view mirror (2), roof molding, front pillar trims, sunvisor, air ventilator garnish and wipers.
