SX4 2WD L4-2.0L (2007)
Front Disc Brake Caliper Disassembly and Assembly
Front Disc Brake Caliper Disassembly and Assembly
Disassembly
CAUTION: Clean around caliper with brake fluid before disassembly.
1. Remove disc brake piston with air blown into flexible hose joint bolt installation hole.
WARNING: Do not apply too highly compressed air which will cause piston to jump out of cylinder. Place a cloth (1) to prevent piston
from damage. It should be taken out gradually with moderately compressed air. Do not place your fingers in front of piston when using
compressed air.