SX4 2WD L4-2.0L (2007)
2. Install valve guide to cylinder head.
Heat cylinder head uniformly at a temperature of 80 to 100°C (176 to 212°F) so that head will not be distorted, and drive new valve guide into
hole with special tools. Drive in new valve guide until special tool (Valve guide installer) contacts cylinder head. After installing, make sure that
valve guide protrudes by specified value from cylinder head.
Special Tool
(A):09916-57350
(B):09916-57340
NOTE:
^
Do not reuse valve guide once disassembled. Install new valve guide (Oversize).
^
Intake and exhaust valve guides are identical.
Valve guide oversize 0.03 mm (0.0012 in.)
Valve guide protrusion "a"
In: 14.5 mm (0.57 in.)
