SX4 2WD L4-2.0L (2007)
3. After fitting oil pan (1) to cylinder block, run in securing bolts and start tightening at the center move wrench outward, tightening one bolt at a
time.
Tighten bolts and nuts to specified torque.
Tightening torque
Oil pan bolt and nut a: 11 Nm (1.1 kgf-m, 8.0 ft. lbs.)
Transmission case No.1 bolt b: 55 Nm (5.5 kgf-m, 40.0 ft. lbs.)
4. Install new gasket and drain plug (2) to oil pan after applying engine oil. Tighten drain plug to specified torque.
Tightening torque
Oil drain plug c: 35 Nm (3.5 kgf-m, 25.5 ft. lbs.)