SX4 2WD L4-2.0L (2007)
Exhaust Manifold: Service and Repair
Exhaust Manifold Removal and Installation
Removal
WARNING: To avoid danger of being burned, do not service exhaust system while it is still hot. Service should be performed after system
cools down.
1. Disconnect negative (-) cable at battery.
2. Remove engine hood.
3. Remove air cleaner assembly.
4. Disconnect ground wire (1) and remove exhaust manifold cover (2).
5. Remove right and left side engine under covers.
6. Remove exhaust No.1 pipe.
7. Support engine assembly by using chain hoist (1) and hook (2) as shown in figure.