SX4 2WD L4-2.0L (2007)
Air Door Actuator / Motor: Service and Repair
HVAC - Air Conditioning System
Air Flow Control Actuator Removal and Installation
Air Flow Control Actuator Removal and Installation
Removal
1. Disconnect negative cable at battery.
2. Remove steering column hole cover from instrument panel.
3. Remove driver side foot duct from HVAC unit.
4. Disconnect air flow control actuator connector (2).
5. Remove air flow control actuator (1) from HVAC unit by removing screws (3).
Installation
Reference: Air Flow Control Actuator and Its Circuit Inspection:Automatic Type