SX4 2WD L4-2.0L (2007)
High Pressure Safety Valve HVAC: Service and Repair
Relief valve Removal and Installation
Removal
1. Recover refrigerant from the A/C system with recovery and recycling equipment referring to "Recovery" in Operation Procedure for Refrigerant
Charge:Manual Type.
2. Remove right side engine under cover.
3. Remove relief valve (1) from compressor (2).
Installation
Reverse removal procedure noting the following instructions.
^
Use new O-ring
^
Apply compressor oil to O-ring.
^
Tighten relive valve to the specified torque.
