SX4 2WD L4-2.0L (2007)
7. Connect yellow connector (1) of side curtain air bag (inflator) module by pushing connector till click is heard from it.
8. Install right-side rear quarter lower trim.
9. Install A/B fuse to fuse box.
10. Connect negative (-) cable at battery.
11. Turn ignition switch to ON position and verify that AIR BAG warning light flashes 6 times and then turns OFF. If it does not operate as described,
perform Air Bag Diagnostic System Check:Advanced Air Bag. See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection
and Diagnostic Overview/Air Bag Diagnostic System Check/Advanced Air Bag