SX4 2WD L4-2.0L (2007)
Drive Belt: Testing and Inspection
Water Pump and Generator Drive Belt
Water Pump and Generator Drive Belt On-Vehicle Inspection
^
Inspect belt for cracks, cuts, deformation, wear and cleanliness. If any of these conditions are found, replace belt, referring to Water Pump and
Generator Drive Belt Removal and Installation.
^
Check to make sure that tension indicators are as follows in the figure by using mirror.
a. If the tension indicator "B" is found to the left of the indicator "A", replace the generator belt.
b. If new generator belt has been installed, indicator "A" should be within a of the figure. If it isn't, it means that belt is not installed properly.
Reinstall it properly.