SX4 2WD L4-2.0L (2007)
7. Stretch deployment harness (A) from air bag (inflator) module or seat belt pretensioner to its full length 10 m (33 ft).
Special Tool
(A): 09932-75031
8. Place 12 volts vehicle battery (1) near the shorted end of deployment harness (A).
9. Check that area around air bag (inflator) module or seat belt pretensioner is clear of all people and loose or flammable objects.
10. Connect adapter cable (B) as follows.
Special Tool
(B): 09932 76510
^
For driver air bag (inflator) module [A]:
Check that driver air bag (inflator) module is placed with its vinyl trim cover facing up, and connect adapter cable (B) to driver air bag
(inflator) module.
^
For passenger air bag (inflator) module [B]:
Check that passenger air bag (inflator) module is firmly and properly secured on deployment fixture (special tool), and connect adapter cable
(B) to passenger air bag (inflator) module.
NOTE: Wind wire harness (5) around at least 2 times.
^
For seat belt pretensioner [C]:
a. Connect adapter cable (B) to seat belt pretensioner.
