SX4 2WD L4-2.0L (2007)
2. Connect driver air bag (inflator) module connector (2) to driver air bag (inflator) module (3) securely as shown in figure.
a. Connect connector.
b. Lock connector with lock button.
3. Install driver air bag (inflator) module (1) to steering wheel (2), taking care so that no part of wire harness is caught between them.
4. Make sure that clearance between module (1) and steering wheel (2) is uniform all the way.
5. Tighten driver air bag (inflator) module mounting bolt (left side) (3) to specified torque first and then driver air bag (inflator) module mounting
bolt (right side) (4) to specified torque.
Tightening torque
Driver air bag (inflator) module mounting bolt a:9 Nm (0.9 kgf-m, 6.5 ft. lbs.)
