SX4 2WD L4-2.0L (2007)
WARNING:
^
The air bag (inflator) module and seat belt pretensioner immediately after deployment/activation is very hot. Wait for at least 30
minutes to cool it off before proceeding the work.
^
Do not apply water, oil, etc. to deployed air bag (inflator) module and to activate seat belt pretensioner.
^
After an air bag (inflator) module has been deployed, the surface of the air bag may contain a powdery residue. This powder consists primarily
of cornstarch (used to lubricate the bag as it inflates) and by-products of the chemical reaction. As with many service procedures, gloves and
safety glasses should be worn.
^
Wash your hands with mild soap and water after completing the work.
Refer to the procedure described under Deployed Air Bag (Inflator) Module and Activated Seat Belt Pretensioner Disposal:Advanced Air Bag for
disposal.
