SX4 2WD L4-2.0L (2007)
6. Set air bag (inflator) module or seat belt pretensioner as follows.
^
For driver air bag (inflator) module
a. Clear space (3) on ground about 185 cm (6 ft) in diameter where driver air bag (inflator) module (1) is set for deployment. Paved, outdoor
location where there is no activity is preferred. If outdoor location is not available, use space on shop floor where there is no activity and
sufficient ventilation is provided. Ensure no loose or flammable object exists within deployment area.
b. Place driver air bag (inflator) module (1) with its vinyl trim cover facing up (2) on ground in Step a.
^
For passenger air bag (inflator) module
a. Clear space (3) on ground about 185 cm (6 ft) in diameter where passenger air bag (inflator) module (1) is set for deployment. Paved,