suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Front Wheel Speed Sensor Encoder Removal and Installation|Page 385 > < Front Wheel Speed Sensor Encoder Removal and Installation|Page 383
Page 2
background image

5. Measure voltage at resistance without wheel rotation. If voltage is out of specification, check sensor, mating encoder and their installation

conditions.

Voltage at the resistance (115 ohms) without wheel rotation
680-960 mV

6. Measure voltage at resistance with wheel rotation and confirm voltage alternately changes between high and low voltages. If voltage does not

change with wheel rotation, check sensor, mating encoder and their installation conditions.

Voltage at the resistance (115 ohms) with wheel rotation
High voltage "a":1360-1930 mV
Low voltage "b": 680-960 mV

Reference

When using oscilloscope for this check, check if peak-to-peak voltage and waveform meet specification.

Peak-to-peak voltage at the resistance (115 ohm) with wheel rotation
High voltage "a":1360 to 1930 mV
Low voltage "b": 680 to 960 mV

Front Wheel Speed Sensor Encoder Removal and Installation|Page 385 > < Front Wheel Speed Sensor Encoder Removal and Installation|Page 383