SX4 2WD L4-2.0L (2007)
Impact Sensor: Testing and Inspection
Side Impact-Sensor Inspection
Side Impact-Sensor Inspection
Reference: Side Impact-Sensor Removal and Installation:Advanced Air Bag
WARNING: During service procedures, be very careful when handling a sensor.
^
Never strike or jar a sensor.
^
A sensor and mounting bracket bolts must be carefully torqued to assure proper operation. Under loose connection, it could cause
improper operation of the air bag system.
CAUTION:
^
Never disassemble side impact-sensor.
^
Sensor should be replaced when it was dropped from a height of 90 cm (3 ft) or more.
^
Check sensor for dents, crack, deformation.
^
Check sensor connector (sensor side and harness side), lock mechanism or sensor lead wire for damage, crack, scorching or melting.
^
Check connector terminals for bent, corrosion or rust. If any faulty condition is found in above checks, replace.