SX4 2WD L4-2.0L (2007)
Steering Gear: Service and Repair
Tie-Rod / Rack Boot Removal and Installation
Hydraulic Type
Tie-Rod / Rack Boot Removal and Installation
Removal
1. Remove steering gear case from vehicle.
2. For ease of adjustment after installation, make marking (4) of tie-rod end lock nut position of tie-rod thread.
3. Loosen tie-rod end lock nut (2) and remove tie-rod end.
4. Remove boot band and clip.
5. Remove boot (3) from tie-rod (1).
6. Remove tie-rod (2) from rack (3).