SX4 2WD L4-2.0L (2007)
14. Install brake disk (2) and brake caliper (3).
15. Tighten caliper carrier bolt to specified torque.
Tightening torque
Caliper carrier bolt: 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
16. Depress foot brake pedal and hold it there.
Tighten new drive shaft nut (1) to specified torque.
Tightening torque
Drive shaft nut a: 200 Nm (20.0 kgf-m, 145.0 ft. lbs.)
CAUTION: Never reuse drive shaft nut (1).
17. Caulk drive shaft nut (1) as shown.