SX4 2WD L4-2.0L (2007)
14. Connect tie-rod end to steering knuckle.
15. Install exhaust No. 1, No.2 and center pipe.
16. Install wheel and tighten nut to specified torque.
Tightening torque
Wheel nut: 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
17. Install air cleaner assembly.
18. Install hood.
19. Lower hoist and vehicle in unloaded condition, tighten suspension control arm bolts to specified torque.
Tightening torque
Suspension control arm bolt: 95 Nm (9.5 kgf-m, 69.0 ft. lbs.)
20. Connect negative (-) cable at battery.
21. For hydraulic P/S model, refill P/S fluid and bleed air.
22. Confirm front wheel alignment.