SX4 2WD L4-2.0L (2007)
4. Remove floor jacks from rear axle.
5. Remount rear differential (4WD model).
6. Install wheel and tighten wheel nuts to specified torque.
Tightening torque
Wheel nut: 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
7. Lower hoist and bounce vehicle up and down several times to stabilize suspension.
8. Tighten absorber lower nuts and rear axle bolts to specified torque.
NOTE: When tightening these nuts and bolts, be sure that vehicle is not on hoist and in unloaded condition.
Tightening torque
Rear shock absorber lower nut: 90 Nm (9.0 kgf-m, 65.0 ft. lbs.)
Rear axle bolt: 73 Nm (7.3 kgf-m, 53.0 ft. lbs.)
9. Install rear fender lining.