SX4 2WD L4-2.0L (2007)
Hydraulic Hose: Service and Repair
Clutch Fluid Pipe Removal and Installation
Removal
CAUTION: Do not allow fluid to get on painted surface. It may cause painted surface damage.
1. Remove dust and dirt from each joint of pipe to be disconnected and clean around brake master cylinder reservoir cap.
2. Take out fluid with syringe or such from brake master cylinder reservoir.
3. Pull clamp (1) of clutch master cylinder (3) and pull clamp (5) of fluid pipe joint (4), and then disconnect clutch fluid pipe (2).
4. Pull clamp (6) of damper (7), and then disconnect damper (7) from clutch fluid pipe (2).